Almathera Ten Pack 2: CDPD 1

home *** CD-ROM | disk | FTP | other *** search

/ Almathera Ten Pack 2: CDPD 1 / Almathera Ten on Ten - Disc 2: CDPD 1.iso / pd / 076-100 / 081 / icon / version6.doc < prev next >

Wrap

Text File | 1995-03-13 | 29KB | 993 lines

Version 6.0 of Icon* Ralph E. Griswold William H. Mitchell Janalee O'Bagy TR 86-10a June 8, 1986 Department of Computer Science The University of Arizona Tucson, Arizona 85721 *This work was supported by the National Science Foundation under Grant DCR-8401831. Version 6.0 of Icon _1_.___B_a_c_k_g_r_o_u_n_d Different versions of the Icon programming language are iden- tified by numbers. The first, Version 1, was superceded by Ver- sion 2. Starting with Version 3, the implementation of Icon was completely changed. While Version 2 is still in use on some com- puters, Version 5 is by far the mostly widely used version of Icon. The features of Version 5 are described in the ``Icon book'' [1]. Since this book is the only complete and generally available description of a widely used version of Icon, Version 5 is sometimes called ``standard Icon''. Since Icon is the byproduct of a research effort that is con- cerned with the development of novel programming language features, some extensions to the standard language are inevit- able. These extensions are incorporated as features of new releases of the implementation. These releases are identified by minor version numbers that are separated from the major version number by a decimal point. For example, Version 5.10 is the tenth minor revision of Version 5. Because of the relationship between language design and imple- mentation, major version numbers usually contain significant language changes that have accumulated over a number of minor revisions, while minor version numbers primarily reflect imple- mentation changes. Recently an implementation of Icon written almost entirely in C has been completed. This implementation is so different from previous ones that some designation is needed to distinguish it from other implementations. It therefore has been designated Ver- sion 6. Despite the change in major version number, the Version 6.0 language is nearly the same as the Version 5.10 language and the Version 5 book continues to serve as the primary reference for Version 6. Since a revision of a book is a major and time- consuming process, this report is provided to supplement the present Icon book. Together, the book and this report provide a description of Version 6.0. Most of the language extensions in Version 6.0 are upward- compatible with Version 5 and almost all programs that contain only standard Version 5 features work properly under Version 6.0. However, some of the more implementation-dependent aspects described in the Version 5 book are now obsolete and there are significant new language features. - 1 - _2_.___F_e_a_t_u_r_e_s__o_f__V_e_r_s_i_o_n__6_._0 Version 6.0 extensions consist of a declaration to facilitate the use of Icon procedure libraries, a new set data type, new options for sorting tables, new syntax to support the use of co- expressions in programmer-defined control operations, the invoca- tion of functions and operators by their string names, and a few new functions. _2_._1___T_h_e__L_i_n_k__D_e_c_l_a_r_a_t_i_o_n The link declaration simplifies the inclusion of separately translated libraries of Icon procedures. If icont [2] is run with the -c option, source files are translated into intermediate _u_c_o_d_e files (with names ending in .u1 and .u2). For example, icont -c libe.icn produces the ucode files libe.u1 and libe.u2. The ucode files can be incorporated in another program with the new link declaration, which has the form link libe The argument of link is, in general, a list of identifiers or string literals that specify the names of files to be linked (without the .u1 or .u2). Thus, when running under UNIX*, link libe, "/usr/icon/ilib/collate" specifies the linking of libe in the current directory and col- late in /usr/icon/ilib. The syntax for paths may be different for other operating systems. The environment variable IPATH controls the location of files specified in link declaratinos. The value of IPATH should be a blank-separated string1 of the form _p_1 _p_2 ... _p_n where each _p_i names a directory. Each directory is searched in turn to locate files named in link declarations. The default value of IPATH is the current directory. _2_._2___S_e_t_s Sets are unordered collections of values and have many of the properties normally associated with sets in the mathematical sense. The function set(a) __________________________ *UNIX is a trademark of AT&T Bell Laboratories. 1The separator is a colon for UNIX systems under Versions 5.9 and 5.10. - 2 - creates a set that contains the distinct elements of the list a. For example, set(["abc",3]) creates a set with two members, abc and 3. Note that set([]) creates an empty set. Sets, like other data aggregates in Icon, need not be homogeneous - a set may contain members of different types. Sets, like other Icon data aggregates, are represented by pointers to the actual data. Sets can be members of sets, as in s1 := set([1,2,3]) s2 := set([s1,[]]) in which s2 contains two members, one of which is a set of three members and the other of which is an empty list. Any specific value can occur only once in a set. For example, set([1,2,3,3,1]) creates a set with the three members 1, 2, and 3. Set membership is determined the same way the equivalence of values is deter- mined in the operation x === y For example, set([[],[]]) creates a set that contains two distinct empty lists. Several set operations are provided. The function member(s,x) succeeds and returns the value of x if x is a member of s, but fails otherwise. Note that member(s1,member(s2,x)) succeeds if x is a member of both s1 and s2. The function insert(s,x) inserts x into the set s and returns the value of s. Note that - 3 - insert(s,x) is similar to put(a,x) in form. A set may contain (a pointer to) itself: insert(s,s) adds s as an member of itself. The function delete(s,x) deletes the member x from the set s and returns the value of s. The functions insert(s,x) and delete(s,x) always succeed, whether or not x is in s. This allows their use in loops in which failure may occur for other reasons. For example, s := set([]) while insert(s,read()) builds a set that consists of the (distinct) lines from the stan- dard input file. The operations s1 ++ s2 s1 ** s2 s1 -- s2 create the union, intersection, and difference of s1 and s2, respectively. In each case, the result is a new set. The use of these operations on csets is unchanged. There is no automatic type conversion between csets and sets; the result of the operation depends on the types of the arguments. For example, 'aeiou' ++ 'abcde' produces the cset 'abcdeiou', while set([1,2,3]) ++ set([2,3,4]) produces a set that contains 1, 2, 3, and 4. On the other hand, set([1,2,3]) ++ 4 results in Run-time Error 119 (set expected). The functions and operations of Icon that apply to other data aggregates apply to sets as well. For example, if s is a set, *s is the size of s (the number of members in it). Similarly, - 4 - type(s) produces the string set. The string images of sets are in the same style as for other aggregates, with the size enclosed in parentheses. Therefore, s := set(["abc",3]) write(image(s)) writes set(2). The operation !s generates the members of s, but in no predictable order. Simi- larly, ?s produces a randomly selected member of s. These operations pro- duce values, not variables - it is not possible to assign a value to !s or ?s. The function copy(s) produces a new set, distinct from s, but which contains the same members as s. The copy is made in the same fashion as the copy of a list - the members themselves are not copied. The function sort(s) produces a list containing the members of s in sorted order. Sets occur after tables but before records in Icon's collating sequence. _E_x_a_m_p_l_e_s _W_o_r_d _C_o_u_n_t_i_n_g: The following program lists, in alphabetical order, all the different words that occur in standard input: - 5 - procedure main() letter := &lcase ++ &ucase words := set([]) while text := read() do text ? while tab(upto(letter)) do insert(words,tab(many(letter))) every write(!sort(words)) end _T_h_e _S_i_e_v_e _o_f _E_r_a_t_o_s_t_h_e_n_e_s: The follow program produces prime numbers, using the classical ``Sieve of Eratosthenes'': procedure main() local limit, s, i limit := 5000 s := set([]) every insert(s,1 to limit) every member(s,i := 2 to limit) do every delete(s,i + i to limit by i) primes := sort(s) write("There are ",*primes," primes in the first ",limit," integers.") write("The primes are:") every write(right(!primes,*limit + 1)) end _2_._3___S_o_r_t_i_n_g__T_a_b_l_e_s Two new options are available for sorting tables. These options are specified by the values 3 and 4 as the second argu- ment of sort(t,i). Both of these options produce a single list in which the entry values and assigned values of table elements alternate. A value of 3 for i produces a list in which the entry values are in sorted order, and a value of 4 produces a list in which the assigned values are in sorted order. For example, if the table wcount contains elements whose entry values are words and whose corresponding assigned values are counts, the following code segment writes out a list of the words and their counts, with the words in alphabetical order: a := sort(wcount,3) every i := 1 to *a - 1 by 2 do write(a[i]," : ",a[i + 1]) The main advantage of the new sorting options is that they only produce a single list, rather than a list of lists as pro- duced by the options 1 and 2. The amount of space needed for the single list is proportionally much less than for the list of lists. - 6 - _2_._4___P_r_o_g_r_a_m_m_e_r_-_D_e_f_i_n_e_d__C_o_n_t_r_o_l__O_p_e_r_a_t_i_o_n_s As described in [3], co-expressions can be used to provide programmer-defined control operations. Version 6.0 provides sup- port for this facility by means of an alternative syntax for pro- cedure invocation in which the arguments are passed in a list of co-expressions. This syntax uses braces in place of parentheses: p{_e_x_p_r_1, _e_x_p_r_2, ..., _e_x_p_r_n} is equivalent to p([create _e_x_p_r_1, create _e_x_p_r_2, ..., create _e_x_p_r_n]) Note that p{} is equivalent to p([]) _2_._5___I_n_v_o_c_a_t_i_o_n__B_y__S_t_r_i_n_g__N_a_m_e A string-valued expression that corresponds to the name of a procedure or operation can be used in place of the procedure or operation in an invocation expression. For example, "image"(x) produces the same call as image(x) and "-"(i,j) is equivalent to i - j In the case of operator symbols with unary and binary forms, the number of arguments determines the operation. Thus "-"(i) is equivalent to -i Since to-by is an operation, despite its reserved-word syntax, it - 7 - is included in this facility with the string name "..." . Thus "..."(1,10,2) is equivalent to 1 to 10 by 2 Similarly, range specifications are represented by ":", so that ":"(s,i,j) is equivalent to s[i:j] Defaults are not provided for omitted or null-valued arguments in this facility. Consequently, "..."(1,10) results in a run-time error when it is evaluated. The subscripting operation is available with the string name "[]". Thus "[]"(&lcase,3) produces c. Arguments to operators invoked by string names are derefer- enced. Consequently, string invocation for assignment operations is ineffective and results in error termination. String names are available for the operations in Icon, but not for control structures. Thus "|"(_e_x_p_r_1,_e_x_p_r_2) is erroneous. Note that string scanning is a control structure. Field references, of the form _e_x_p_r . _f_i_e_l_d_n_a_m_e are not operations in the ordinary sense and are not available via string invocation. In addition, conjunction is not available via string invocation, since no operation is actually performed. String names for procedures are available through global iden- tifiers. Note that the names of functions, such as image, are global identifiers. Similarly, any procedure-valued global iden- tifier may be used as the string name of a procedure. Thus in - 8 - global q procedure main() q := p "q"("hi") end procedure p(s) write(s) end the procedure p is invoked via the global identifier q. _2_._6___N_e_w__F_u_n_c_t_i_o_n_s The function proc(x,i) converts x to a procedure, if possible. If x is procedure-valued, its value is returned unchanged. If the value of x is a string that corresponds to the name of a pro- cedure as described in the preceding section, the corresponding procedure value is returned. The value of i is used to distin- guish between unary and binary operators. For example, proc("*",2) produces the multiplication operator, while proc("*",1) produces the size operator. The default value for i is 1. If x cannot be converted to a procedure, proc(x,i) fails. The function seq(i,j) generates an infinite sequence of integers starting at i with increments of j. An omitted or null- valued argument defaults to 1. For example, seq() generates 1, 2, 3, ... . Storage is allocated automatically during the execution of an Icon program, and garbage collections are performed automatically to reclaim storage for subsequent reallocation. Garbage collec- tion normally only occurs when it is necessary. Garbage collec- tion can be forced by the function collect(). _2_._7___M_i_n_o_r__L_a_n_g_u_a_g_e__C_h_a_n_g_e_s There are two minor language changes: o+ The keyword &options of Version 5.10 is not present in Version 6.0. o+ Version 6.0 reads the last line of a file, even if that line does not end with a newline; Version 5 discards such a line. _2_._8___V_e_r_s_i_o_n__C_h_e_c_k_i_n_g The Icon translator converts a source-language program to an intermediate form, called _u_c_o_d_e. The Icon linker converts one or more ucode files to a binary form called _i_c_o_d_e. The format of Version 6.0 ucode and icode files is different from that of ear- lier versions. To avoid the possibility of malfunction due to - 9 - incompatible ucode and icode formats, Version 6.0 checks both ucode and icode files and terminates processing with an error message if the versions are not correct. _3_.___O_b_s_o_l_e_t_e__a_n_d__C_h_a_n_g_e_d__F_e_a_t_u_r_e_s__o_f__V_e_r_s_i_o_n__5 The original implementation of Version 5 supported both a com- piler (iconc) and an interpreter (icont). Version 6.0 supports only an interpreter. Interpretation is only slightly slower than the execution of compiled code and the interpreter is portable and gets into execution much more quickly than the compiler. How- ever, it is not possible to load C functions with the interpreter as it was with the compiler. A system for personalized inter- preters [4] is included with Version 6.0 for UNIX systems to make it comparatively easy to add new functions and otherwise modify the Icon run-time system. Some run-time environment variables have changed; see Appendix A. A number of error messages have been changed. Appendix B contains a list of run-time error messages. _4_.___K_n_o_w_n__B_u_g_s__i_n__V_e_r_s_i_o_n__6_._0 o+ The translator does not detect arithmetic overflow in conversion of numeric literals. Very large numeric literals may have incorrect values. o+ Integer overflow on multiplication and exponentiation is not detected during execution. Such overflow may occur during type conversion. o+ Line numbers may be wrong in diagnostic messages related to lines with continued quoted literals. o+ In some cases, trace messages may show the return of sub- scripted values, such as &null[2], that would be errone- ous if they were dereferenced. o+ If a long file name for an Icon source-language program is truncated by the operating system, mysterious diagnos- tic messages may occur during linking. o+ Stack overflow is checked using a heuristic that may not always be effective. o+ If an expression such as x := create _e_x_p_r is used in a loop, and x is not a global variable, unreferenceable co-expressions are generated by each suc- cessive create operation. These co-expressions are not - 10 - garbage collected. This problem can be circumvented by making x a global variable or by assigning a value to x before the create operation, as in x := &null x := create _e_x_p_r o+ Stack overflow in a co-expression may not be detected and may cause mysterious program malfunction. o+ Co-expressions were designed to support coroutine pro- gramming as well as the more usual application for the controlled production of the results of a generator. However, the implementation is not sufficiently general to support coroutines. In Version 5, the use of co- expressions in a coroutine fashion could produce program malfunction. In Version 6.0, such uses are prevented and cause error termination. As a consequence, some uses of co-expressions that worked in Version 5 may not work in Version 6.0. In particular, the example in Section 13.4.2 of the Icon book does not work in Version 6.0. o+ The garbage collector was designed for machines with com- paratively small address spaces and may not perform well for computers with very large address spaces. In partic- ular, if an attempt is made to create a very large data object that will not fit into memory (such as a million- element list), it takes an inordinately long time to determine that the object can not be allocated. _5_.___P_o_s_s_i_b_l_e__D_i_f_f_e_r_e_n_c_e_s__A_m_o_n_g__V_e_r_s_i_o_n__6_._0__I_m_p_l_e_m_e_n_t_a_t_i_o_n_s Version 6.0 of Icon is written almost entirely in C and most of its features are machine-independent. Appendix B of the Icon book lists differences that may occur because of different machine architectures. In addition to the differences listed there, the implementation of sets and tables uses a parameter that is different for 16- and 32-bit computers. This parameter determines how set members and table elements are physically stored as a result of hashing. The difference only is noticeable in the results produced by !x and ?x, where x is a set or a table. A few aspects of the implementation of Version 6.0 are specific to different computer architectures and operating sys- tems. Co-expressions require a context switch that is implemented in assembly language. If this context switch is not implemented, an attempt to activate a co-expression results in error termina- tion. Arithmetic overflow checking also generally requires assembly-language routines and may not be supported on some implementations of Version 6.0. - 11 - Some features of Icon, such as opening a pipe for i/o and the system function, are closely related to UNIX. These features should work correctly for Version 6.0 running on UNIX systems, but they may not be supported on other operating systems. _A_c_k_n_o_w_l_e_d_g_e_m_e_n_t_s In addition to the authors of this report, several persons contributed to the implementation of Version 6.0 of Icon. The implementation of sets and the new sorting options were done by Rob McConeghy. Other major contributors include Gregg Townsend, Chris Janton, and Kelvin Nilsen. _R_e_f_e_r_e_n_c_e_s 1. Griswold, Ralph E. and Madge T. Griswold. _T_h_e _I_c_o_n _P_r_o_g_r_a_m_- _m_i_n_g _L_a_n_g_u_a_g_e, Prentice-Hall, Inc., Englewood Cliffs, New Jersey. 1983. 2. Griswold, Ralph E. _I_C_O_N_T(_1), manual page for _U_N_I_X _P_r_o_g_r_a_m_m_e_r'_s _M_a_n_u_a_l, Department of Computer Science, The Univer- sity of Arizona. May 1986. 3. Griswold, Ralph E. and Michael Novak. ``Programmer-Defined Control Operations'', _T_h_e _C_o_m_p_u_t_e_r _J_o_u_r_n_a_l, Vol. 26, No. 2 (May 1983). 4. Griswold, Ralph E. _P_e_r_s_o_n_a_l_i_z_e_d _I_n_t_e_r_p_r_e_t_e_r_s _f_o_r _V_e_r_s_i_o_n _6._0 _o_f _I_c_o_n, Technical Report TR 86-12, Department of Computer Sci- ence, The University of Arizona. May 1985. - 12 - Appendix A - Environment Variables There are a number of environment variables that can be set to override the default values for sizes of Icon's storage regions and other run-time parameters. These environment variables are: TRACE The initial value of &trace. The default value is zero. NBUFS The number of input-output buffers. The default value is 10 for computers with large address spaces and 5 for computers with small address spaces. NOERRBUF No buffering of standard error output. ICONCORE Produce a core dump in the case of error termina- tion. MSTKSIZE The size in words of the main interpreter stack. The default value is 10000 for machines with large address spaces and 3000 for machines with small address spaces. STRSIZE The initial size in bytes of the allocated string region. The default value is 51200 for machines with large address spaces and 10240 for machines with small address spaces. HEAPSIZE The initial size in bytes of the allocated block region. The default value is 51200 for machines with large address spaces and 10240 for machines with small address spaces. STATSIZE The initial size in bytes of the static region in which co-expressions are allocated. The default value is 20480 for machines with large address spaces and 1024 for machines with small address spaces. STATINCR The increment for expanding the static region. The default increment is one-fourth the initial size of the static region. COEXPSIZE The size in words of co-expression blocks. The default value is 2000 for machines with large address spaces and 1000 for machines with small address spaces. - 13 - Appendix B - Run-Time Error Messages 101 integer expected 102 numeric expected 103 string expected 104 cset expected 105 file expected 106 procedure or integer expected 107 record expected 108 list expected 109 string or file expected 110 string or list expected 111 variable expected 112 invalid type to size operation 113 invalid type to random operation 114 invalid type to subscript operation 115 list or table expected 116 invalid type to element generator 117 missing main procedure 118 co-expression expected 119 set expected 201 division by zero 202 remaindering by zero 203 integer overflow 204 real overflow underflow or division by zero 205 value out of range 206 negative first operand to real exponentiation 207 invalid field name 208 second and third arguments to map of unequal length 209 invalid second argument to open 210 argument to system function too long 211 by clause equal to zero 212 attempt to read file not open for reading 213 attempt to write file not open for writing 214 recursive co-expression activation 301 interpreter stack overflow 302 C stack overflow 303 unable to expand memory region 304 memory region size changed - 14 -